38 Automatic Operation Features
Automatic Playback
When you put a tape in the TV/VCR,the power will come
on automatically. If the tape’s record tab is missing,playback
will begin.If a timer recording is set, the power will not
come on automatically when you insert a tape with the
record tab intact.If a timer recording is set and the TV/VCR
power is off,the TV/VCR will eject the tape if the record tab
is missing.
Automatic Rewind,Eject, Off
When you play,fast forward,or record a tape to its end, the
TV/VCR will rewind the tape,stop, turn itself off, and eject
the tape.
Tape Eject
A tape can be ejected with the TV/VCR power on or off
(but the TV/VCR must be plugged in).If a timer recording is
programmed,a tape cannot be ejected when the power is
off. In this case, turn on the TV/VCR power,then eject the
tape. Be sure to insert a tape and turn off the TV/VCR
power for the timer recording.
Automatic Tracking Adjustment
The TV/VCR automatically adjusts the tracking to give you
the best possible picture quality.With some recordings,you
may get a better picture using manual tracking.
Manual Tracking
To adjust the tracking manually,press the CHANNEL ▲/▼
buttons on the TV/VCR or the CH(annel) ▲/▼button on
the remote control during playback.
Tracking returns to Automatic Tracking Adjustment when
you insert a tape or press STOP/▼.
Before
Tracking
Adjustment
After
Tracking
Adjustment