Hooking Up the TV/VCR (cont’d) 7
VIDEOAUDIO
POWER VOLUME CHANNEL STOP/EJECTREW PLAYF.FWDREC/OTR
EARPHONE
OUT
IN
VIDEO
IN
OUT
3CH
4CH
AUDIO ANT.
OUT
IN
VIDEO
IN
OUT
3CH
4CH
AUDIO ANT.
VIDEO AUDIO
• Before connecting an antenna or Cable TV or Satellite signal to the ANT(enna) Jack, make sure the pin is not
bent.If the pin is bent, straighten it as illustrated.
• Audio and video cables are not supplied.
•If your VCR,Camcorder,or DVD Player has stereo Audio Out jacks (red and white),connect only the white jack to
the TV/VCR’s white AUDIO In jack.Otherwise, you will need a stereo-to-mono or “splitter”audio cable.
Helpful Hints
Crooked Pin Straight Pin
Bent pin
Plug
Cable
AUDIO/VIDEO In Jacks
on front of TV/VCR
AUDIO/VIDEO OUT
Jacks on VCR (example)
Connect an Audio cable to the AUDIO OUT
Jack on the VCR and to the AUDIO In Jack
(white) on the front of the TV/VCR.
Connect a Video cable to the VIDEO OUT
Jack on the VCR and to the VIDEO In Jack
(yellow) on the front of the TV/VCR.
2When all connections are complete,plug in the TV/VCR’s power cord.
DHooking Up Your TV/VCR to Another Video Source (VCR,Camcorder,DVD
Player,etc.)
You may need this connection if you want to copy tapes,view tapes playing on a VCR or Camcorder,
or view Discs from a DVD Player. Select channel 00 (AUX) at the TV/VCR when viewing tapes/Discs
playing on the VCR,Camcorder,or DVD Player.