Magnavox MDV455 owner manual Set Spdif Output accordingly. Details are on

Turn on the Stereo and set it to the correct Audio In channel or sound source. Refer to the Stereo owner’s manual for details.

MDV455_17x 11/11/03 4:34 PM Page 15

Hookups (cont’d) 15

Connecting to a TV and a Stereo

(Stereo has Dolby DigitalTM or MPEG2)

Back of TV

(example only)

Stereo Receiver (example only)

1

COAXIAL DIGITAL	VIDEO IN
AUDIO IN

2

3

Connect the Coaxial jack of the DVD Player to the Coaxial Digital

1 Audio In jack on your Stereo. Use an appropriate digital audio cable (not supplied). See your electronics retailer for details and availability.

Connect the supplied video cable to the yellow Video jack of the

2 DVD Player and to the TV’s Vidio In jack. The supplied video cable has yellow markings.

Plug the power cords of the DVD Player, Stereo, and the TV into an

3 active power outlet. Press STANDBY-ON y on the front of the DVD Player to turn it on.

4

Turn on the TV. Set it to the correct Video In channel. See your TV

5 owner’s manual for details. Or, go to your lowest TV channel (01 or

02)and change channels downward until you see the DVD screen saver on the TV.

Helpful Hints

• Set SPDIF Output accordingly. Details are on page 37.

• Your Stereo must support MPEG2 or Dolby Digital. Check the Stereo’s manual.

• If you prefer or need to use the S-VIDEO or Y Pb/Cb Pr/Cr jacks instead, see pages 12-13.