Magnavox MDV455 Connect the supplied video cable to the yellow Video jack, Has yellow markings

MDV455_17x 11/11/03 4:34 PM Page 14

14 Hookups (cont’d)

Connecting to a TV and a Receiver

with and without Dolby Pro Logic decoding

Stereo

(example only)

RIGHT AUDIO IN

LEFT AUDIO IN

Back of TV

(example only)

1

VIDEO IN

2

3

1	Connect the supplied video cable to the yellow Video jack of the
	DVD Player and to the TV’s Video In jack. The supplied video cable
	has yellow markings.
2	Connect the supplied audio cable to the white and red Audio L/R
	(left and right) jacks on the DVD Player and to the left/right Audio

In jacks on the Stereo. Match the cable colors to the jack colors.

Plug the power cords of the DVD Player, Stereo, and the TV into an

3 active power outlet. Press STANDBY-ON y on the front of the DVD Player to turn it on.

Turn on the Stereo and set it to the correct Audio In channel or

4 sound source. Refer to the Stereo owner’s manual for details.

Turn on the TV. Set it to the correct Video In channel. See your TV

5 owner’s manual for details. Or, go to your lowest TV channel (01 or 02) and change channels downward until you see the DVD screen saver on the TV.

Helpful Hints

• If you prefer or need to use the S-video or Y Pb/Cb Pr/Cr jacks instead, see pages 12-13.You only need one video connection between the TV and the DVD Player.

• Adjust Downmix and Dual Mono accordingly. Details are on page 36.