Magnavox MDV455 owner manual Spdif Output, Press System Menu to remove the menus

MDV455_17x 11/11/03 4:34 PM Page 37

SPDIF Output 37

If you connected the DVD Player to a Stereo using the COAXIAL jack as shown on page 15, you need to adjust the SPDIF OUTPUT (digital audio) setting as described below. If you are not using the COAXIAL jack, no adjustment is necessary.

1 Press SYSTEM MENU.
2 The General Setup Page will be selected. Press OK or 4.				2-4
3 Press 4 repeatedly to select SPDIF Output, then press 2.
4	Press 3 or 4 to select SPDIF Off, SPDIF/RAW, PCM/48K or
	PCM/96K, then press OK.
	Choose SPDIF/RAW to select the original default audio settings as
	received by most Stereos. However, if the sound is distorted, your
	Stereo may need to receive audio in the PCM format (pulse code
	modulation, contains only left and right audio signals).
	Discs are recorded in a certain sampling rate.The higher the sampling
	rate,the better the sound quality. Some Discs are recorded in a high
	sampling rate of 96KHz. Select PCM/96K if you are playing Discs
	recorded at this high rate. Otherwise, select PCM/48K.
	Choose PCM/48K or PCM/96K only if your Stereo is PCM-
	compatible. Or, if your Stereo cannot decode MPEG-2 or DTS audio,
	choose SPDIF/RAW.
	Refer to your Stereo owner’s manual for details.
		- - General Setup Page - -
		TV Display
		Angle Mark
		OSD Lang	SPDIF Off
		SPDIF Output
		Captions	SPDIF/RAW
		Program	PCM/48K
		Screen Saver	PCM/96K
		RAW Data Via SPDIF

5 Press SYSTEM MENU to remove the menus.

1,5

Helpful Hint

•SPDIF is the Sony-Philips Digital Interface.