Magnavox MRD-200 warranty Connecting to a TV with an S-Video In jack

12 Hookups - TV (cont’d)

Connecting to a TV with an S-Video In jack

COMPONENT

PWCr

PWCw

Y

VIDEO OUT

AM

FR

FL

C

SR

SL

CENTER

AUDIO OUT

AUDIO IN

S-VIDEO

VIDEO

+

+

LINE OUT

OUT

OUT

L

DIGITAL OUT

FM

(7Ω)

R

SPEAKER (4Ω)

AM/FM

WOOFER

TV

AUX

OPTICAL

COAXIAL

ANTENNA

LINE OUT

1 Connect the DVD Receiver’s S-VIDEO OUT jack to the S-VIDEO IN jack on your TV. You will need an S-Video cable (not supplied).

2 To hear TV channels through the DVD Home Cinema System, connect the supplied red and white audio cables to the DVD Receiver’s red/white, right/left AUDIO IN jacks and to the TV’S right/left AUDIO OUT jacks. Match the cable colors to the jack colors.

3 Connect the power cords of the DVD Receiver and TV to a power outlet.

4 Turn on the TV and set it to the correct S-Video In chan- nel. Go to the lowest TV channel and change channels down until you find the S-Video In channel. (It is not channel 3 or 4 as it might be when using a VCR.) See your TV owner’s manual for details.

5 Press STANDBY-ONy on the front of the DVD Receiver to turn on the DVD Receiver. The red Standby light will disappear.

6 It is not necessary to set VIDEO OUT to S-VIDEO. S-VIDEO is the DVD Receiver’s default setting. However, if your picture is distorted, check the VIDEO OUT setting. Make sure it is set to S-VIDEO.Details are on page 28.