Magnavox MRV640 manual Picture settings, You can select the following functions in this menu

Picture settings

You can select the following functions in this menu.

'TV shape'

The picture can be adjusted to fit your TV:

'4:3 letterbox': for a 'wide-screen' display with black bars on the top and bottom

'4:3 panscan': for a full-height picture with the sides trimmed to fill your TV screen

'16:9' : for wide-screen TV (frame ratio 16:9)

'Black level shift'

Adapts the color for NTSC disc playback when set to 'On'.

'Video shift'

This allows you to move the picture left or right using the D , C buttons in order to adjust the picture to your TV screen.

'Component Video output'

This allows you to switch the Component Video signal between 'Interlaced' and 'Progressive Scan.'

Warning If your TV has separate connections for 'Interlaced' and 'Progressive Scan' or it does not switch automatically between the two, it is possible that no picture will appear on the TV after it is switched from one to the other.

1Select the setting you need with SELECT . Choose Progressive Scan only if your TV has Progressive Scan.

2Confirm with OK .

aNo picture appears on the TV after switching

Check the display of your DVD recorder. 'PRO': 'Progressive Scan' is on

No display: 'Interlaced' is on. Switch your TV to the corresponding input jack or select the corresponding connection. You can also switch the Component video output signal of the DVD Recorder as follows:

1Disconnect the recorder's power cord.

2Hold down N on the DVD Recorder while reconnecting the power cord. 'PRO' (progressive scan) appears on the display.

3If you want to switch back, repeat steps 1 and 2 . 'PRO' disappears from the display. The DVD Recorder is switched to 'Interlaced.'

Problem

Picture

TV shape	16:9
Black level shift
	Off
Video shift
	ï
Component Video output
	Interlaced

68 User preferences