ASSEMBLY INSTRUCTIONS
ASSEMBLY OF BLOWER PIPES
CAUTION : Before performing any work on the blower, always stop the engine and pull the spark plug connectors off the spark plug.
Always wear protective gloves!
CAUTION : Start the blower only after having assembled it completely.
1.Assemble straight pipe with swivel (3) into flexible pipe (1) and tighten hose band 76 (2).
(1)
(2)(3)
2.Install control handle (4) onto straight pipe with swivel and tighten the clamp screw (5).
3.Assemble flexible pipe to elbow (6) on blower and tighten hose band 100 (7).
4.Assemble straight pipe (8) to straight pipe with swivel, turning straight pipe clockwise to lock it into place.
5. Make sure all clamps are tight.
(4)
(5)
(6)(7)
(8)
8