Start the Blower only in accordance with the instructions. Do not use any other methods for starting the engine (6)!

•Use the blower and the tools supplied only for applications specified.

•Start the blower engine only after the entire tool has been assembled. Operation of the tool is permitted only after all the appropriate accessories are attached.

•The engine is to be switched off immediately if there are any engine problems.

•When working with the blower, always wrap your fingers tightly around the handle, keeping the control handle cradled between your thumb and forefinger. Keep your hand in this position to have your machine under control at all times. Make sure your control handle is in good condition and free of moisture, pitch, oil or grease.

Always ensure a safe, well-balanced footing.

•Operate the blower in such a manner as to avoid inhalation of the exhaust gases. Never run the engine in enclosed rooms (risk of suffocation and gas poisoning). Carbon monoxide is an odorless gas. Always ensure there is adequate ventilation.

•Switch off the engine when resting and when leaving the blower unattended. Place it in a safe location prevent danger to others, setting fire to combustible materials, or damage to the machine.

•Never lay the hot blower onto dry grass or onto any combustible materials.

•All protective parts and guards supplied with the machine must be used during operation.

•Never operate the engine with a faulty exhaust muffler.

•Shut off the engine during transport (7).

•Position the blower safely during car or truck transportation to avoid fuel leakage.

•When transporting the blower, ensure that the fuel tank is completely empty.

Refueling

•Shut off the engine during refueling (7), keep well away from open flame

(8) and do not smoke.

•Avoid skin contact with petroleum products. Do not inhale fuel vapor. Always wear protective gloves during refueling. Change and clean protective clothing at regular intervals.

•Take care not to spill either fuel or oil in order to prevent soil contamination (environmental protection). Clean the blower immediately after fuel has been spilt. Allow wet cloths to dry before disposing in properly, covered container to prevent spontaneous combustion.

•Avoid any fuel contact with your clothing. Change your clothing immediately if fuel has been spilled on it (fire hazard).

•Inspect the fuel cap at regular intervals making sure that it stays securely fastened.

•Carefully tighten the locking screw of the fuel tank. Change locations to start the engine (at least 3 meters away from the place of refueling) (9).

•Never refuel in closed rooms. Fuel vapors accumulate at ground level (risk of explosions)

•Only transport and store fuel in approved containers. Make sure stored fuel is not accessible to children.

•Do not attempt to refuel a hot or a running engine.

(6)

￿Resting

￿Transport

￿Refueling

￿Maintenance

￿Tool Replacement

(7)

(8)

3 meters

(9)

4

Page 3 Page 5
Page 4
Image 4
Makita BBX7600CA instruction manual Refueling
Page 3 Page 5

BBX7600CA, BBX7600 specifications

The Makita BBX7600CA and BBX7600 are powerful backpack blowers designed for both professional landscapers and homeowners seeking high-performance tools for yard maintenance. These models embody a combination of innovative technology, ergonomic design, and robust performance, making them ideal for tackling a range of outdoor cleanup tasks.

The BBX7600CA is equipped with a 75.6 cc, 4-stroke engine, which delivers impressive blowing power without the need for a fuel/oil mix. This engine type offers reduced emissions and a quieter operation, making it environmentally friendly and user-friendly. The BBX7600 features a similar robust engine configuration, offering reliable performance and durability to handle demanding jobs.

One of the standout features of these blowers is the “Easy Start” technology. This system significantly reduces the pull force required to start the engine, allowing for hassle-free ignition, especially during colder weather. Additionally, both models are designed with an efficient air filter system that enhances airflow while ensuring longevity and reducing the need for frequent maintenance.

Ergonomics play a critical role in the design of the BBX7600CA and BBX7600. The blowers come with a padded harness and adjustable shoulder straps, allowing users to work comfortably for extended periods. Their lightweight construction further adds to user convenience, making them easy to maneuver around the yard, whether you’re clearing leaves, debris, or grass clippings.

Another notable characteristic is the anti-vibration technology integrated into these models. This feature minimizes operator fatigue by dampening vibrations that are common in high-powered outdoor equipment. As a result, users can maintain productivity without discomfort during extensive use.

The blowers are also designed with an easy-to-access throttle and cruise control functionality. This allows users to maintain a consistent power output without having to keep their finger on the throttle trigger, enhancing control and comfort.

In summary, the Makita BBX7600CA and BBX7600 are versatile, efficient, and user-friendly backpack blowers. Their strong engines, ergonomic designs, and advanced features make them valuable additions to any outdoor tool arsenal, capable of tackling tough jobs with ease while ensuring operator comfort and reduced environmental impact. Whether for professional landscaping or residential use, these blowers stand out as reliable choices for maintaining a clean and tidy outdoor space.
Top Page Image Contents