AVOID SKIN AND EYE CONTACT
Mineraloilproductsaswellasoilsdegreaseyourskin. If yourskin comes in contact with these substances repeatedly and for a longer period of time, it will desiccate. Various skin deseases may result. In addition,allergic reactions are known.
Eyes can be irritated by contact with oil. If oil comes into your eyes, immediately wash them with clear water.
If your eyes are still irritated,go to see a doctor.
Refuelling
FOLLOW THE SAFETY PRECAUTIONS
Be careful and cautious when handling fuels. The engine must be switched off.
-Thoroughly clean the tanks around the screw plugs to prevent did from entering the fuel or oil tank.
-Unscrew t h e plug and fill in fuel or chain oil until it reaches the bottom edge ofthe filler socket. Be careful when refilling. Do not spill fuel or oil.
-Tightly screw on the plug.
Clean screw plug and tank after refuelling.
Lubricating the chain
In order to ensure sufficient lubrication of the chain there must always be enough oil in the tank. Its contents is sufficient for approx. 1/2 hour of continuous operation.
Adjusting the chain lubrication
The motor must be switched off. | @ |
The oil pump can be regulatedwith the adjustingscrew (F/l).The adjusting screw is mounted on the bottom side of the casing.
The oil pump has been adjusted to a medium feed quantity by
MAKITA.
For changing the feed quantity use the universal wrench and adjust the adjusting screw (F/1) in the following way:
-turn to the right to reduce the quantity
-turn to the left to increase the quantity.
To guaranteea troublefreeoperationof the oil pump the oil guide groove at the crank case (G/2)and the oil inlet bore in the guide bar (G/3)must be cleaned regularly.
13
