FULL POWER SWITCH (Except EG301A)
Select the voltage using the FULL POWER SWITCH in accordance with the electrical appliance.
Refer to TABLE 2.
［CAUTION］
Change the FULL POWER SWITCH after turning the AC circuit breaker to "OFF".
120V
120V 240V
ENGLISH
Switch position
Lower Voltage Receptacle
Higher Voltage Receptacle
120V
Activated full rated output
N.A
120/240V
Activated half of rated output
Activated full rated output
TABLE 2
(1) CHECKING THE OPERATION
■Overloaded ?
Please make it sure that the generator is not overload.
NOTE :
Most induction loads such as electric motors require three to five times more wattage than their ratings during starting.
(2) STOPPING THE ENGINE
■Turn off the switch of load.
■Switch off generator's AC breaker.
■Disconnect tool or appliance.
■Turn the STOP SWITCH to the position "O" (OFF).
NOTE :
Allow the engine about 3 minutes to cool down at
