Makita EG511A, EG781A, EG711A, EG301A Only for charging 12 volt battery, DC Circuit Breaker, － 18－

(2)DC APPLICATION

(Only for charging 12 volt battery)

DC receptacle (Only for charging 12 volt battery)

For charging 12 voltage battery, 12V-8.3A (100W) of maximum AC power can be taken out from the DC receptacle by means of the exclusive DC cable.

The exclusive DC cable is come with your generator set (included in the package).

	BLACK
	CABLE
RED
CABLE	-
	+

DC receptacle

DC Circuit Breaker

DC circuit breaker is turned off to shut down the DC power, when the DC is over the usage range or the battery is defective.

Check the generator and/or battery for overloading or defect, and turn on the DC circuit breaker after no problem and defect are found out.

Connection of exclusive DC cable :

■Connect positive (red) clip of DC cable to positive (+) terminal on battery.

■Connect negative (black) clip of DC cable to negative (-) terminal on battery.

－ 18－