Manitowoc Ice manual Table of Contents, Section Ice Machine Operation

Table of Contents (continued)

Self-Contained Electrical Wiring Connections	2-11
Self Contained Ice Machine 115/1/60 or 208-230/1/60	2-11
Self Contained Ice Machine 208-230/3/60	2-11
Self Contained Ice Machine 230/1/50	2-11
Remote Electrical Wiring Connections	2-12
Remote Ice Machine With Single Circuit Model Condenser
115/1/60 or 208-230/1/60	2-12
Remote Ice Machine With Single Circuit Model Condenser
208-230/3/60 or 380-415/3/50	2-12
Remote Ice Machine With Single Circuit Model Condenser
230/1/50	2-12
Water Supply and Drain Requirements	2-13
Water Supply	2-13
Water Inlet Lines	2-13
Drain Connections	2-13
Cooling Tower Applications (Water-Cooled Models)	2-13
Water Supply and Drain Line Sizing/Connections	2-14
Remote Condenser/Line Set Installation	2-15
Remote Ice Machines Refrigerant Charge	2-15
Guidelines for Routing Line Sets	2-16
Calculating Remote Condenser Installation Distances	2-17
Lengthening or Reducing Line Set Lengths	2-18
Connecting A Line Set	2-18
Remote Receiver Service Valve	2-18
Remote Ice Machine Usage with Non-Manitowoc Multi-Circuit Condensers	2-19
Warranty	2-19
Head Pressure Control Valve	2-19
Fan Motor	2-19
Internal Condenser Volume	2-19
Condenser DT	2-19
Refrigerant Charge	2-19
Quick Connect Fittings	2-19
Non-Manitowoc Multi-Circuit Condenser Sizing Chart	2-20
Installation Check List	2-21
Additional Checks for Remote Models	2-21
Before Starting the Ice Machine	2-22
AuCS® Automatic Cleaning System	2-22

Section 3

Ice Machine Operation

Component Identification	3-1
Sequence Of Operation	3-2
Initial Start-Up or Start-Up After Automatic Shut-Off	3-2
Freeze Sequence	3-2
Harvest Sequence	3-3
Automatic Shut-Off	3-3
Safety Timers	3-3
Warm Water Rinse Cycle	3-3
Operational Checks	3-4
General	3-4
Water Level	3-4
Ice Thickness Check	3-4
Harvest Sequence Water Purge	3-5

Section 4

2 Part Number 80-1620-3