![](/images/new-backgrounds/1072540/7254061x1.webp)
Section 2 | Installation Instructions |
|
|
Remote Ice Machine Usage with
WARRANTY
The sixty (60) month compressor warranty, including thirty six (36) month labor replacement warranty, shall not apply when the remote ice machine is not installed within the remote specifications. The foregoing warranty shall not apply to any ice machine installed and/or maintained inconsistent with the technical instructions provided by Manitowoc Ice, Inc. Performance may vary from Sales specifications.
If the design of the condenser meets the specifications, Manitowoc’s only approval is for full warranty coverage to be extended to the Manitowoc manufactured part of the system. Since Manitowoc does not test the condenser in conjunction with the ice machine, Manitowoc will not endorse, recommend, or approve the condenser, and will not be responsible for its performance or reliability.
Important
Manitowoc warrants only complete new and unused remote packages. Guaranteeing the integrity of a new ice machine under the terms of our warranty prohibits the use of
HEAD PRESSURE CONTROL VALVE
Any remote condenser connected to a Manitowoc S- Model Ice Machine must have a head pressure control valve
!Caution
Do not use a fan cycling control to try to maintain discharge pressure. Compressor failure will result.
FAN MOTOR
The condenser fan must be on during the complete ice machine freeze cycle (do not cycle on fan cycle control). The ice maker has a condenser fan motor circuit for use with a Manitowoc condenser. It is recommended that this circuit be used to control the condenser fan(s) on the
INTERNAL CONDENSER VOLUME
The
CONDENSER ∆T
∆T is the difference in temperature between the condensing refrigerant and entering air. The ∆T should be 15 to 20°F
REFRIGERANT CHARGE
Remote ice machines have the serial plate refrigerant charge (total system charge) located in the ice maker section. (Remote condensers and line sets are supplied with only a vapor charge.)
!Caution
Never add more than nameplate charge to ice machine for any application.
QUICK CONNECT FITTINGS
The ice machine and line sets come with quick connect fittings. It is recommended that matching quick connects (available through Manitowoc Distributors) be installed in the
Part Number |