LEARN MODE
This remote controller is capable of learning and storing codes used by other remote controls that you already own.
For codes which are not learned, the remote controller will transmit either the Marantz preset codes from the initial settings, or remote codes from another manufacturer’s AV equipment which is set by the customer.
The receiver sensor for the remote controller signals is located at the top of the remote controller.
Notes:
• This remote controller is capable to learn around 60 |
codes. |
4. Select the button to be learned.
• LEARN indicator lights up.
l/
SLEEP DISPLAY P.DIRECT SURROUND
|
|
| LIP SYNC/ |
AUTO |
| dts | INPUT |
1 | 2 | 3 |
|
CS | EX/ES | VIRTUAL | T.MODE |
4 5 6
5. Press and hold the button of the original remote controller to learn until the SEND indicator blinks twice.
Notes:
•When the SEND indicator blinks once, repeat this step.
E R A S I N G P R O G R A M M E D C O D E S (RETURNING TO INITIAL SETTINGS)
Codes can be erased in three ways: by buttons, sources, and by all memory contents.
Erasing the code by buttons
1. Press and hold down the SET and MENU buttons until LEARN indicator blinks.
|
|
|
| MULTI/ CAT | |
SOURCE | SET | OFF | ON |
|
|
l/ |
|
|
|
|
|
SLEEP | DISPLAY | P.DIRECT | SURROUND | INFO | MENU |
|
|
| LIP SYNC/ |
|
|
AUTO | 2 | dts | INPUT |
|
|
1 | 3 |
| ENTER | ||
2. Select the SOURCE button to select the button
3. Press ENTER button to continue erasing.
•The SEND indicator blinks twice and the mode returns to LEARN mode.
•To cancel the erasing operation, do not press ENTER button and simply touch any other button.
INFO | MENU |
| ENTER |
T.TONE |
|
/SET UP | EXIT |
4. To return the NORMAL mode, press the SET button.
ENGLISH
• When the batteries are getting weak , the learing |
procedure is not successful. |
LEARNING PROCEDURE
1. Place the remote controller so that its infrared signal transmitter is facing the infrared signal receiver on the Marantz remote controller at a
| • If the LEARN indicator flashes when the SEND | to be erased. |
|
|
|
|
|
|
|
|
|
|
| indicator is lit, then the button cannot be learned. |
| BASS | TREBLE |
| Erasing the all SOURCES |
|
| ||||
| • When the memory of the remote controller is full, | TV | DVD | VCR | DSS |
|
| |||||
|
|
|
|
| 1. | Press and hold down the SET and MENU | ||||||
| the LEARN and SEND indicators blink once. If | TUNER | CD | CDR | MD | |||||||
|
|
|
|
| ||||||||
| you want to learn the code, you should erase other | TAPE | AUX1 | AUX2 | AMP |
| buttons until LEARN indicator blinks. |
| ||||
| learned button. |
|
|
|
|
|
|
|
|
| MULTI/ CAT |
|
6. | Repeat steps 4 and 5 to learn other buttons in |
| REMOTE CONTROLLER |
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
| ||||
|
|
|
|
| l/ | SET | OFF | ON |
|
| ||
|
|
|
|
|
|
| SOURCE |
|
| |||
| same SOURCE. | 3. Press and hold down the SLEEP button and |
| SLEEP | DISPLAY | P.DIRECT SURROUND | INFO | MENU | ||||
|
|
|
|
| ||||||||
|
|
|
|
|
|
|
|
| ||||
distance of about 0.05 m (2 inches).
7. Repeat steps 3 to 6 to learn other SOURCE.
8. When you have finished programming the remote controller, press the SET button, then LEARN indicator stops blinking and exits from the LEARN mode.
LEARNSEND
SOURCE SET OFF 
ON
l/ 
SLEEP DISPLAY P.DIRECT SURROUND
press the learned button twice to be erased. |
|
| LIP SYNC/ |
|
AUTO |
| dts INPUT |
| |
• SEND indicator blinks twice and the mode | 1 | 2 | 3 | ENTER |
returns to LEARN mode.
2. Press and hold down the SLEEP button and press POWER ON and POWER OFF button.
SOURCE SET OFF 
ON
• LEARN indicator lights.
l/
SLEEP DISPLAY P.DIRECT SURROUND
|
|
| LIP SYNC/ |
|
|
|
AUTO |
| dts | INPUT |
|
|
|
1 | 2 | 3 | SOURCE | SET | OFF | ON |
l/ |
|
|
| |||
|
|
| SLEEP | DISPLAY | P.DIRECT | SURROUND |
| LIP SYNC/ | 4. | To return the NORMAL mode, press the SET |
|
| LIP SYNC/ |
| AUTO | 2 | dts INPUT | |||
AUTO | dts INPUT |
| 1 | 3 |
button.
2. Press and hold down the SET and MENU buttons until LEARN indicator blinks.
|
|
|
| MULTI/ CAT | |
SOURCE | SET | OFF | ON |
|
|
l/ |
|
|
|
|
|
SLEEP | DISPLAY | P.DIRECT | SURROUND | INFO | MENU |
|
|
| LIP SYNC/ |
|
|
AUTO |
| dts | INPUT |
|
|
1 | 2 | 3 |
| ENTER | |
3. Select the SOURCE button to select the
SOURCE.
| BASS |
| TREBLE |
TV | DVD | VCR | DSS |
TUNER | CD | CDR | MD |
TAPE | AUX1 | AUX2 | AMP |
REMOTE CONTROLLER
Notes:
•When the SEND indicator blinks once again, the transmitting code is unavailable for remote controller, or the transmitting signal is intercepted by noise.
•If no buttons are pressed for approximately 1 minutes while in the LEARN mode, the remote controller automatically exits from the LEARN mode.
Erasing the code by SOURCE
1. Press and hold down the SET and MENU buttons until LEARN indicator blinks.
|
|
|
| MULTI/ CAT | |
SOURCE | SET | OFF | ON |
|
|
l/ |
|
|
|
|
|
SLEEP | DISPLAY | P.DIRECT | SURROUND | INFO | MENU |
|
|
| LIP SYNC/ |
|
|
AUTO |
| dts | INPUT |
|
|
1 | 2 | 3 |
| ENTER | |
2. Press and hold down the SLEEP button and press the learned SOURCE button twice to be
erased. |
|
|
|
| ||
• | LEARN indicator lights. |
|
|
| ||
|
|
| ATT. |
| ||
SOURCE | SET | OFF | ON | BASS | TREBLE |
|
l/ |
|
| TV | DVD | VCR | DSS |
|
|
| ||||
SLEEP | DISPLAY | P.DIRECT | SURROUND |
|
|
|
|
|
| TUNER | CD | CDR | MD |
|
|
| LIP SYNC/ |
|
|
|
AUTO |
| dts | INPUT |
|
|
|
1 | 2 | 3 | TAPE | AUX1 | AUX2 | AMP |
|
|
|
| |||
3. Press ENTER button to continue erasing.
•The SEND indicator blinks twice and the mode returns to LEARN mode.
•To cancel the erasing operation, do not press ENTER button and simply touch any other button.
INFO | MENU |
| ENTER |
T.TONE |
|
/SET UP | EXIT |
4. To return the NORMAL mode, press the SET button.
Note:
Erasing codes will return to the factory preset code, or there will leave empty if the button has no factory preset code.
17
