ENGLISH
MULTI ROOM
SYSTEM (SR5002 only)
The Multi Room system is a function which allows you to listen to the same or a different source in a room other than the room in which the SR5002 is located.
The operations possible with the multi room function are explained briefly below.
For details, refer to the instruction manual supplied with the multi room remote controller and SR5002.
When the outputs of the MULTI OUT terminals are wired and connected to amplifiers installed in other rooms or M (MULTI) SPEAKER B terminals are wired and connected to L&R speakers in other room, different sources can be played in rooms other than the main room in which the SR5002 and the playback devices are installed.
SR5002 has some feature to MULTI ROOM SYSTEM as source selector, sleep timer, Multi Room Speaker output and remote control.
MULTI ROOM PLAYBACK USING THE MULTI
ROOM OUT TERMINALS
The SR5002 is equipped with audio
A separately sold stereo power amplifier can be connected to enjoy multi room playback.
1. 4. | 2. | 3. |
| AV SURROUND RECEIVER SR5002 |
|
| CL | 0 | +10 | MEMO |
|
| CH/ CAT | MUTE | VOLUME |
| |
|
| SPKR A/B |
| 3. | |
1. 4. | INFO | MULTI/ CAT | MENU | ||
|
| ENTER |
|
| |
| T.TONE |
|
|
|
|
| /SET UP |
|
| EXIT |
|
| REC | T.DISP | PTY | F.DIRECT |
|
| - PRESET + | - TUNING + |
| ||
| DISC+ | ANGLE | SUB TITLE | AUDIO |
|
| ATT. |
|
| ||
|
| BASS | TREBLE |
| |
2. | TV | DVD | VCR | DSS |
|
TUNER | CD | CDR | MD | 1. 4. | |
TAPE | AUX1 | AUX2 | AMP |
REMOTE CONTROLLER
MULTI ROOM PLAYBACK USING THE MULTI
SPEAKER TERMINALS
The SR5002 allows you to connect another set of speakers and place them in a different room or separated area for listening to music.
2. | 1. 4. | 3. |
| AV SURROUND RECEIVER SR5002 |
|
| CL | 0 | +10 | MEMO |
|
| CH/ CAT | MUTE | VOLUME |
| |
|
| SPKR A/B |
| 3. | |
1. 4. | INFO | MULTI/ CAT | MENU | ||
|
| ENTER |
|
| |
| T.TONE |
|
|
|
|
| /SET UP |
|
| EXIT |
|
| REC | T.DISP | PTY | F.DIRECT |
|
| - PRESET + | - TUNING + |
| ||
| DISC+ | ANGLE | SUB TITLE | AUDIO |
|
| ATT. |
|
| ||
|
| BASS | TREBLE |
| |
2. | TV | DVD | VCR | DSS |
|
TUNER | CD | CDR | MD | 1. 4. | |
TAPE | AUX1 | AUX2 | AMP |
REMOTE CONTROLLER
1. Press the MULTI SPEAKER
2. Select the input source using the INPUT SELECTOR knob or function button on the remote controller.
Then, the display indicates “MSPKR VOLUME” “MSPKR
3. During this time, you can set the volume level in the multi room as desired.
This will only set the volume in the multi room.
4. To cancel this function, press the MULTI button on the unit or remote controller (after pressing the AMP button on the remote controller).
“MULTI” indicator on the front panel will be turned off.
Notes for MULTI ROOM SPEAKER
•MULTI ROOM SPEAKER On/ Off is available in main room only.
•MULTI ROOM SPEAKER output terminals can be used when the SURROUND BACK SPEAKER is set NONE in SPEAKER SETUP menu. (See SPEAKER SETUP, page 27)
•“The Surr. Back Speakers are in use” is displayed by pressing the MULTI SPEAKER
1. Press the MULTI button on the unit or remote controller (after pressing the AMP button on the remote controller). The unit enters MULTI ROOM mode, and the display indicates “SELECT SOURCE.” The “MULTI” indicator will flash for about 10 seconds.
2. Select the input source using the INPUT SELECTOR knob or function button on the remote controller.
Then, the display indicates “MULTI VOLUME” “MULTI VOL. xx” for approx. 5 seconds.
3. During this time, you can set the volume level in the multi room as desired.
This will only set the volume in the second room.
4. To cancel this function, press the MULTI button on the unit or remote controller (after pressing the AMP button on the remote controller).
48
“MULTI” indicator on the front panel will be turned off.