Marantz SR7008 appendix 22Video, 153

	Contents	Connections	Playback	Settings	Tips	Appendix
	Setting items			Description			Page
Graphic EQ		Uses the graphic equalizer to adjust the tone of each speaker.					171
	Speaker Selection	Select whether to adjust tones for individual speakers or for all speakers.					171
	Adjust EQ	Adjust tonal balance for each frequency band. Adjust the speaker selected in “Speaker Selection”.					171
	Curve Copy	Copy “Audyssey Flat”curve from MultEQ® XT32.					171

22Video

	Setting items	Description	Page
Picture Adjust		Adjusts the video quality.	172
	Picture Mode	Select the desired picture mode according to the video content and your viewing environment.	172
	Contrast	Adjust picture contrast.	172
	Brightness	Adjust picture brightness.	172
	Saturation	Adjust picture chroma level (color saturation).	172
	Hue	Adjust green and red balance. Also called Tint.	172
	Noise Reduction	Reduce overall video noise.	173
	Enhancer	Emphasize picture sharpness.	173
HDMI Setup		Makes settings for HDMI video/audio output.	173
	Auto Lip Sync	Make automatic compensation for timing shift in audio and video output.	173
	HDMI Audio Out	Select HDMI audio output device.	174
	Video Output	Selects which HDMI outputs to use.	174
	HDMI Pass Through	Selects how the AV receiver will pass HDMI signals to the HDMI output in standby power mode.	174
	HDMI Control	You can link operations with devices connected to HDMI and compatible with HDMI Control.	174
	Pass Through Source	The AV receiver will “pass through” the sources HDMI signal when in standby.	175
	Power Off Control	Links the power standby of this unit to external devices.	175

			153
Front panel	Display	Rear panel		Remote	Index