Marantz SR7008 appendix Manual Setup, Amp Assign, 22Assign Mode, 192

Contents	Connections	Playback	Settings	Tips	Appendix
Manual Setup
			5.1ch + ZONE2/3 : Setting to assign the unit’s built-in power amplifier
				for ZONE2 and ZONE3 and output the audio in
Perform when setting the speakers manually or when changing settings
				stereo.
made in Audyssey® Setup.
			7.1ch(Bi-Amp) : Setting to assign the unit’s built-in power amplifier
• If you change the speaker settings after performing Audyssey® Setup,
				for front speaker bi-amp connections and output the
it will not be possible to select Audyssey MultEQ® XT32, Audyssey
				audio in stereo.
Dynamic EQ® and Audyssey Dynamic Volume® (vpage 167, 168,
			5.1ch(Bi-Amp) + ZONE2 : Settings to use the front speakers via the
169).
				bi-amp connection and assign the internal
• “Manual Setup” can be used without changing the settings. Please set
				power amp for ZONE2 to output stereo
if necessary.
				audio.
			7.1ch + Front B : Setting to use the second set of front speakers for
Amp Assign				playback. You can switch the speaker to be used as
Select power amplifier usage	method.			the “Front Speaker” (vpage 198) between Front
				speaker A and B.

22Assign Mode

Set the assignment mode.

9.1ch(SB/FH/FW) (Default) : Assigns all power amplifiers within this unit for MAIN ZONE.

7.1ch + ZONE2 : Setting to assign the unit’s built-in power amplifier for ZONE2 and output the audio in stereo.

			192
Front panel	Display	Rear panel		Remote	Index