Marantz SR7008 appendix 22Desired sound does not come out, 231

ContentsConnectionsPlaybackSettingsTipsAppendix

22Desired sound does not come out

Symptom		Cause/Solution	Page
The volume does not increase.	• The maximum volume is set too low. Set the maximum volume using “Limit”on the menu.		167, 204
	• Appropriate volume correction processing is performed according to the input audio format		–
	and settings, so the volume may not reach the upper limit.
No sound comes out with the HDMI	• Check the connection of the HDMI connectors.		40, 41, 44, 45,
connection.			46
	• When outputting HDMI audio from the speakers, set “HDMI Audio Out” on the menu to		173
	“AVR”. To output from the TV, set “TV”.		132
	• When using the HDMI control function, check that the audio output is set to the AV amplifier
	on the TV.
No sound comes out of a specific	• Check that the speaker cable is properly connected.		32
speaker.	• Check that a selection other than “None” is set for the “Speaker Config.” setting in menu.		193, 194
	• Check the “Assign Mode” setting in the menu.		192
	• When the sound mode is “STEREO” and “VIRTUAL”, audio is only output from the front		–
	speakers and subwoofer.
No sound is produced from	• Check the subwoofer connections.		33
subwoofer.	• Turn on the subwoofer’s power.		–
	• Set “Speaker Config.” –	“Subwoofer” on the menu to “2 spkrs” or “1 spkr”.	194
	• When “Speaker Config.”	– “Front” in the menu is set to “Large”, depending on the input	193
	signal and the sound mode, no sound may be output from the subwoofer.		198
	• When no subwoofer audio signal (LFE) is included in the input signals, no sound may be
	output from the subwoofer.		198
	• You can make the subwoofer always output sound by setting the subwoofer mode to
	“LFE+Main”.

			231
Front panel	Display	Rear panel		Remote	Index