Marantz SR7008 appendix Settings, 22IP Address, 22Subnet Mask, 22Default Gateway

Contents Connections Playback Settings Tips Appendix

Settings

Make settings for wired LAN.

•If you are using a broadband router (DHCP function), there is no need to make the settings at “IP Address” and “Proxy”, since the DHCP function is set to “On” in this unit’s default settings.

•Only set “Settings” when connecting to a network without a DHCP function.

Network/Settings
DHCP
	Off
-IP Address	192.168.000.001
-Subnet Mask	255.255.255.000
-Default Gateway	255.255.255.000
-Primary DNS	000.000.000.000
-Secondary DNS	000.000.000.000
Proxy	Off
-Address	000.000.000.000
-Port	00000

Save

Cancel

Configure the network settings manually

22IP Address

Set the IP address within the ranges shown below.

•The Network Audio function cannot be used if other IP addresses are set.

CLASS A: 10.0.0.1 – 10.255.255.254

CLASS B: 172.16.0.1 – 172.31.255.254

CLASS C: 192.168.0.1 – 192.168.255.254

22Subnet Mask

When connecting an xDSL modem or connector adapter directly to this unit, input the subnet mask indicated in the documentation supplied by your provider. Normally input 255.255.255.0.

22Default Gateway

When connected to a gateway (router), input its IP address.

22Primary DNS, Secondary DNS

If there is only one DNS address indicated in the documentation supplied by your provider, input it at “Primary DNS”. If two or more DNS are provided by your provider, enter both “Primary DNS” and “Secondary DNS”.

22DHCP

Selects how to connect to the network.

On (Default) : Configure the network settings automatically from your router.

Off : Configure the network settings manually.

			200
Front panel	Display	Rear panel		Remote	Index