Marantz SR7008 appendix Audyssey, 22Limit, 22Power On Level, 22Mute Level, 22MultEQ XT32

Contents Connections Playback Settings Tips Appendix

22Limit

Make a setting for maximum volume. 60 (–20dB) / 70 (–10dB) / 80 (0dB) Off (Default)

22Power On Level

Define the volume setting that is active when the power is turned on. Last (Default) : Use the memorized setting from the last session. Mute : Always use the muting on condition when power is turned on. 1 – 98 (–79dB – 18dB) : The volume is adjusted to the set level.

Audyssey

Set Audyssey MultEQ® XT32, Audyssey Dynamic EQ®, Audyssey Dynamic Volume®, Audyssey LFC™ and Audyssey DSX®. These can be selected after Audyssey® Setup has been performed. For additional information on Audyssey technology, please see page 257.

%

•“MultEQ® XT32”, “Dynamic EQ”, “Dynamic Volume” and “Audyssey LFC™” settings are stored for each input source.

•“MultEQ® XT32”, “Dynamic EQ”, “Dynamic Volume” and “Audyssey LFC™” cannot be set when the sound mode is set to “DIRECT” or “PURE DIRECT”.

22Mute Level

Set the amount of attenuation when muting is on.

Full (Default) : The sound is muted entirely.

–40dB : The sound is attenuated by 40 dB down.

–20dB : The sound is attenuated by 20 dB down.

22MultEQ® XT32

MultEQ® XT32 compensates for both time and frequency characteristics of the listening area based on Audyssey® Setup measurement results. Selection is done from three types of compensation curves. We recommend the “Audyssey” setting.

Audyssey (Default) : Optimize the frequency response of all speakers.

Audyssey Byp. L/R : Optimize frequency response of speakers except front L and R speakers.

Audyssey Flat : Optimize frequency response of all speakers to flat response.

Graphic EQ : Apply frequency response set with “Graphic EQ” (vpage 171).

Off : Turn “MultEQ® XT32” equalizer off.

%

• When using headphones, “MultEQ® XT32” is automatically set to “Off”.

			167
Front panel	Display	Rear panel		Remote	Index