Marantz SR7008 22About Setup and measurement microphone placement, 22About Audyssey Sub EQ HT

Contents Connections Playback Settings Tips Appendix

22About Setup and measurement microphone placement

•Measurements are performed by placing the Setup and measurement microphone successively at multiple positions throughout the entire listening area, as shown in GExample qH.

•Even if the listening environment is small as shown in GExample wH, measuring at multiple points throughout the listening environment results in more effective correction.

22About the main listening position (*M)

The main listening position is the position where listeners would normally sit or where one would normally sit alone within the listening environment. Before starting Audyssey® Setup, place the Setup and measurement microphone in the main listening position. Audyssey MultEQ® XT32 uses the measurements from this position to calculate speaker distance, level, polarity, and the optimum crossover value for the subwoofer.

		GExample qH
		FL SW C	FR
	(	: Measuring positions)
SL		*M	SR
FL	Front speaker (L)
FR	Front speaker (R)
C	Center speaker

GExample wH

FL SW C FR

( : Measuring positions)

	SL		*M	SR
SW		Subwoofer
SL		Surround speaker (L)
SR		Surround speaker (R)

22About Audyssey Sub EQ HT™

Audyssey Sub EQ HT™ makes the integration of dual subwoofers seamless by first compensating for any level and delay differences between the two subwoofers and then applying Audyssey MultEQ® XT32 to both subwoofers together.

To run Audyssey Sub EQ HT™ you must select “Measure (2 spkrs)” in “Channel Select” (vpage 186).

			184
Front panel	Display	Rear panel		Remote	Index