Marantz SR7008 appendix 22i/p Scaler, 22Resolution, 176

Contents Connections Playback Settings Tips Appendix

22i/p Scaler

Sets the video input signal for which i/p Scaler processing is performed.

nn When the input source is set other than to “iPod/USB” and “NETWORK”

Analog (Default) : Use i/p (interlace-to-progressive) scaler function for analog video signals.

Analog & HDMI : Use i/p scaler function for analog and HDMI video signal.

HDMI : Use i/p scaler function for HDMI video signals.

Off : Do not use i/p scaler function.

nn When the input source is set to “iPod/USB” and “NETWORK”

On (Default) : Use i/p scaler function.

Off : Do not use i/p scaler function.

%

•“Analog & HDMI” can be set for input sources for which an HDMI input connector is assigned.

•Which items can be set depend on the input source assigned to each input connector.

• This function is not effective when the input signal is “x.v.Color”, 3D, sYCC 601 color, Adobe RGB color, Adobe YCC 601 color or computer resolutions.

22Resolution

Set the output resolution.

You can set “Resolution” separately for HDMI output of the analog video input and HDMI input.

Auto (Default) : The number of pixels the TV connected to the HDMI MONITOR OUT connector supports is detected automatically and the appropriate output resolution is set.

480p/576p / 1080i / 720p / 1080p / 1080p:24Hz / 4K : Set the output resolution.

%

•When “i/p Scaler” is set to “Analog & HDMI”, the resolution of both the analog video input signal and HDMI input signal can be set.

•When set to “1080p:24Hz”, you can enjoy film-like pictures for film sources (in 24 Hz). For video sources and mixed sources, we recommend setting the resolution to “1080p”.

•It is not possible to convert a 50 Hz signal into 1080p/24Hz. It is output at a resolution of 1080p/50Hz.

			176
Front panel	Display	Rear panel		Remote	Index