4.5KR21 KEY CHAIN REMOTE CONTROLS

 

 

1

CONTROLS:

2

 

 

 

3

1. CONTROL INDICATORS

 

 

 

 

 

 

 

 

 

 

 

 

Comes on when the remote control sends a radio

4

 

 

 

5

signal when keys are pressed. When the indicator

 

 

 

 

 

 

 

blinks only weakly, the batteries have to be

 

 

 

 

 

replaced.

7

 

 

 

 

2. ARM

 

 

 

 

 

8

 

 

 

 

Switches on the security system in the Arm Away

 

 

 

 

mode. All sensors are now activated.

 

 

 

 

 

 

 

 

 

 

3. DISARM

9

 

 

 

 

Switches off the security system.

4. LIGHTS ON

Switches on the lights connected to the lamp module set to the Home Automation base address (refer to 6.8).

5. LIGHTS OFF

Switches off the lights connected to the lamp

module set to the Home Automation base address (refer to 6.8).

7 + 8 PANIC

When both red keys are pressed simultaneously, an immediate alarm will be initiated by the security system.

9. BATTERY HOLDER

The battery holder is located inside the remote. The back of the remote can be easily opened using your fingernails or a small screwdriver. Only use 3V lithium batteries model CR2016 (2x).

ACTIVATION:

BATTERIES

The KR21 is supplied with batteries installed.

INSTALLATION (install mode)

Push the ARM key for more than 3 seconds and release the button; the indicator blinks.

4.6SYSTEM REMOTE CONTROL SH624 (OPTIONAL FOR MS9470)

CONTROLS:

1. PANIC

3. CONTROL KEYS

5. MODE SWITCH

To controlling the security system and as well as

The position of this switch defines the functions of

the Marmitek X-10 Home Automation modules.

the control keys.

When this key is pressed, an immediate alarm will be initiated by the security system.

2. CONTOL INDICATOR

Comes on when the remote control sends a radio signal when keys are pressed. When the indicator blinks only weakly, the batteries have to be replaced.

4. DIMMING KEY

To control the light level of lamps which are connected to lamp modules. Through the control keys, the lamp module will be activated at first by pressing the ON key for this module. You then can control the light level of the lamps by pressing the DIM or BRIGHT key.

SWITCH IN SEC POSITION:

ARM HOME: the security system is switched into the partial alarm mode meaning that all door/window sensors are activated but not the motion sensors.

ARM AWAY: all sensors of the security system are activated.

10

MARMITEK