The RF DigiMax 210 thermostat does not need any extra wiring and works within 30 meters range. It is equipped of a
secured RF code which the SC2800 base station will learn during the installation process. This code will assure that
the Maxi Controller will only answer to messages sent by your DigiMax 210.
You can connect up to 4 DigiMax 210 to the Maxi Controller. Depending on the information sent by the thermostats, the SC2800 base station will send X10 messages on the power line to turn On or Off X10 modules connected to your heaters or boiler.
Each thermostat transmits the comfort set point and the ambient temperature. In the SC2800 base station you can enter a temperature setback
,between 1 and 9 degrees. When the Maxi Controller is in "Disarm" or "Arm home" mode, it
will turn On or Off the X10 module connected to the boiler depending of the ambient temperature and the comfort set point.
When the console is in "Arm Away" mode, the setback differential to the comfort set point is applied. Suppose the ambient temperature is 15 °C, the comfort set point is 20°C, with a setback of 4°C : the comfort set point minus the setback is 20°C - 4°C= 16°C, so the console will send an On message. Suppose that now the ambient temperature is 19°C, the comfort set point minus the setback is 20°C - 4°C= 16°C, so the console will send an OFF message.
The thermostat functions are described in the manual of the DigiMax 210 thermostat.
The DigiMax 210 is available separately (Art. No. 09431). Please visit www.marmitek.com for more information.
14 | MARMITEK |