Matsushita CF-W4HWEZZBM Reference Manual, SD Memory Card, Fast User Switching Function Windows XP

Reference Manual

The Reference Manual is not displayed

Is Acrobat Reader installed?

If Acrobat Reader is not installed, run the following* 1 in [start] - [Run] to reinstall the program. When installing the program, do not change the installation destination folder . If the destination folder is changed,the Reference Manual cannot be opened from [start]*2 menu.

* 1 English: [c:\util\reader\m\acroreader51_enu_full.exe] Traditional Chinese : [c:\util\reader\tc\acroreader51_cht_full.exe] Simplified Chinese : [c:\util\reader\sc\acroreader51_chs_full.exe]

SD Memory Card

Cannot log on with the SD	Windows logon user name and password are not set in the SD memory card correctly.
memory card
	Enter the Windows user name and password without using the SD memory card.
	After logging on, reset the SD memory card, or use the [Control Panel] to create a user
	with the user name and password set on the SD memory card.
	If you change the setting for Language for non-Unicode programs after the check mark has
	been added in [Use when logging on to Windows] under [SD Card Settings] - [Setting for
	this SD card], remove the check mark from [Use when logging on to Windows] under [SD
	Card Settings] - [Setting for this SD card], and set the user name and password again.
Cannot use the SD memory	When using the SD memory card with other peripheral devices, format the SD memory
card	card using the peripheral device. For details, refer to the instruction manual for that device.
	Note that the SD memory card is not supported by formats other than the SD memory
	card standard.

Fast User Switching Function Windows XP

Some applications may not work properly

When switching to a different user with the Fast User Switching function, the following problems may occur.

• Some applications may not work properly.

• Key combination with Fn may not work.

•It may not be possible to set the settings of the display.

•The wireless LAN cannot be used.

•The B’ s CLiP icon will no longer be shown on the taskbar and a CD-RW disc cannot be written on.

In this case,log off all users, and try the operation once more. If the problem persists, restart the computer.

Disk Operations

If the DVD-ROM & CD-R/ RW drive vibrates exces- sively or is noisy

Is the disc bent or labeled?

Check to see if the disc is inserted correctly, and check that the disc is in good condition. If the disc is good and inserted correctly , set [DVD Drive Speed] to [Low] in the Setup Utility.

Others

No response

Press Ctrl + Shift + Esc	to open Task Manager and close the software application
which is not responding.
After shutting down by sliding	the power switch for more than four seconds, slide the

power switch to power on and open the application again.

If the program no longer works normall, delete the program using the following menu. Then reinstall the program.

Windows XP : [start] - [Control Panel] - [Add or Remove Programs]

21