5.4. Test Selection
Starting up the input menu
1.From the menu screen shown below, choose Quit and press Enter.
1.DIAG on FD
2.LAN test
3.SD I/F test
4.Modem test
5.Wireless LAN test (Wireless LAN Model only)
6.CD testQ. Quit
menu screen
2.When A: \DIAG appears, input "JDG_W4H, EXE" and press Enter.
3.The input screen shown below will appear.
To choose menu items, hold down "ALT" and press the selection key.
Example:
"ALT" + F brings up the File menu.
Input screen
Order of test flow selection
Input screen startup
1.Reading the test conditions settings file 
Press "ALT" and "F".
2Press "L".
3Press "ALT" and "O".
4Press Enter.
If the test condition settings file is not read, this means
the test program is not running correctly.
2. setting the test items | [ Saving selected test items ] | ||
| Press "ALT" and "S". | ||
2 | Press "S". | If you change the file name when | |
3 | Choose the test item and press Enter. | saving the file in step 6 , you can | |
4 | Choose the test whose settings are- | create test condition settings for | |
| to be changed, press "A" for Additional- | custom test items. |
|
| and "R" for Erase. | Example: |
|
| All initial VAlues are "0" so set | TEST1. * * * | |
tests other than the necessary ones to "1".
5Press "O" twice to return the menu screen.
6To save the selected list, press "ALT" and "F" at the file menu.
Starting the test
Press "ALT" and "R".
Press "R".
This will start the test.
End of test
29
