Speaker installation
Secure 2mm or more for the space in each rib and the soldering part.
Rib | Rib |
| |
2mm or more | Soldering Part |
| |
| Rib |
2mm or more |
|
Rib | Inserts in Ditch |
|
Processing of Speaker Cable
Rib outside suiting |
|
0 1mm | Speaker Box |
Rib outside suiting 01mm
Inserts in latch
Inserts in the table side.
Inserts in ditch
6.3.7.Assembly of Antenna Board Part
Line processing of Antenna Cable (L)
Install the Antenna Board in the Bottom Case.
And process remainder of the Antenna Cable as shown in the figure below.
Process the cable
with the boss between ribs.
Install DC Jack in bottom
Boss
Antenna Cable (L)
Place between the bottom base and install.
Process the cable to the ditch of the Bottom Case.
Bottom Case
The terminal must become
straight below.
The upper side is close with the under latch is hooked the Bottom Case
Antenna Cover(L)
DC Jack Holder
Antenna Cable (L)
The under latch is hooked the Bottom Case
The under latch is hooked the Bottom Case
47