6.2.18.Remove the LCD Unit
Preparation : perform the section 6.2.1. to 6.2.4. first.
1.Remove the 2 Screws (M) Screw(M):DXQT26+D5FNL(N15)
2.Remove the LCD Cable from the Connectors (CN10) and (CN11) on the Main Board and then remove the LCD Unit.
Screw (M)
LCD Cable
Screw (M)
CN10
CN11
Bottom Case
6.2.19.Remove the Hinge Cover
Preparation : perform the section 6.2.1. to 6.2.4. and 6.2.18. first.
1.Remove the 2 Screws(U) and the Hinge Cover(L,R). Screw(U):DRHM0074ZA(N3)
LCD Unit
Screw (U)
Hinge Cover (L)
Screw (U)
Hinge Cover (R)
6.2.20.Remove the LCD Unit and the LCD Rear
Preparation : perform the section 6.2.1. to 6.2.4. and 6.2.18. to 6.2.19. first.
1.Remove the 2 Screws (Y). Screw(Y):DRHM0074ZA(N3)
LCD Unit
Screw (Y)
Screw (Y)
2.The LCD Front Case and the combination parts of LCD Rear Case are separated.
(Combination parts are 6 the top and bottom places for each, 4 right and left places for each)
3.Remove the Hinge (L, R).
Hook Position
LCD Unit
Hinge (L)
LCD Front Case
Hinge (R)
LCD Rear Case
40
