6.2.16.Remove the MODEM
Preparation : perform the section 6.2.1. to 6.2.4. and 6.2.11. first.
1.Remove the 2 Screws (O). Screw(O):DXQT2+D25FNL(N8)
2.Remove the MODEM to the vertical direction from Connector (CN8) on the Main Board.
Screw (O) Screw (O)
MODEM
CN18
6.2.17.Remove the Card Bus Ejector
Preparation : perform the section 6.2.1. to 6.2.3. and 6.2.11. first.
1.Remove the 1 Screw (P) from connected side of Main Board.
Screw(P):DFHE5025XA(N1)
Screw (P)
Main Board
2.Return it on the revers to Card Bus Ejector side.
3.Remove the 2 hooks (C) of the Card Bus Ejector from the Connector (CN14) and the Card Bus Ejector is removed.
Card Bus Ejector
Hook(C)
Main Board
CN14
39
