4.Remove the 3 Screws (I), 2 Screws (J), 2 Screws (K) and 2 Screws (L) from the Top Case. Screw(I):DXQT2+E6FNL(N13) Screw(J):DXQT26+D8FCL(N16) Screw(K):DXQT2+E6FCL(N12) Screw(L):DFHE5025XA(N1) Screw(R):DXQT2+E12FNL(N11) Screw(S):DXQT2+E6FNL(N13)
Screw (J) | Disc Cover |
|
Screw (K) Screw (K)
Screw (I)
Screw
6.2.5.Remove the SW Board
Preparation : perform the section 6.2.1. to 6.2.4. first.
1.Peel off the Tape.
2.Remove the Solenoid Cable.
3.Remove the 1 Screw (Q) and then remove the SW Board. Screw(Q):DXHM0057ZA (N7)
Note:
Note it that the Disc Eject Knob comes off at the same time.
Tape
Screw
(I)
(J)
Top Case
Screw (Q)
Switch Board
Screw (L) | Screw (R) |
Screw (I) | Screw (L) |
Screw (S) |
5.Lift up the Top Case, remove the Pad FFC and then remove the Top Case.
Top Case
Disc Eject Knob
Solenoid Cable
FFC (PAD) | FFC (SW) |
34
