MaxTech NXP-16 Section Two Installation, Unpacking Your Network Adapter, Hardware Installation

Section Two - Installation

This section provides step-by-step instructions on how to install your new network adapter. Installation of this network adapter is a two-step process con- sisting of actual hardware installation and card configuration. This network adapter is designed to be configured by the Plug and Play capabilities of the host computer/operating system. Also, the adapter can be installed and configured in a legacy system by using the setup program (SETUP.EXE) included on the driver diskette.

2.1 Unpacking Your Network Adapter

Two types of network adapter cards are available. Before you proceed, determine the model you have purchased. The following table summarizes the contents and features of your Ethernet product:

Model

Adapter Card RJ-45

BNC

BNC T-connector Boot ROM Socket Installation disk User's Guide

LINK LED*

ACT LED

NXP-16T NXP-16BT

xx

xx x x

xx

xx

xx

xx

xx

*Note: The LINK LED only indicates a twisted-pair connection. It is disabled for any other cable type.

2.2 Hardware Installation

Installation of this adapter card requires opening and manipulating your PC. Exercise caution at all times when working with AC powered and static- sensitive equipment. Turn off and unplug your PC

2