For more information on running SETUP, refer to the file README.TXT in the root directory of the driver diskette.
The following configuration options are available in the SETUP Main Menu:
•View Current Configuration
•Setup
•Run Diagnostics
View Current Configuration displays the current settings of the card.
The Setup option allows user selection of param- eters such as Operating Mode, Medium type, Full- Duplex Enable/Disable, I/O Base Address, Inter- rupt, and Boot ROM Address. Setup is used to configure the card in systems without Plug and Play capabilities.
2.4 Testing The Adapter
Adapter diagnostics are included in the SETUP.EXE program found in the root directory of the driver diskette. Refer to the file README.TXT in the same directory for detailed information.
Note: To run the diagnostics under Windows 95, click on Start/Shut down and select “Restart the computer in
Setup provides the following testing options when you select Run Diagnostics from its Main Menu.
•Run EEPROM Test
•Run Diagnostics on Board
•Run Diagnostics on Network
The EEPROM Test option performs read/write tests on the adapter's
The Run Diagnostics on Board option runs sev- eral tests and the results are indicated by either PASS or FAIL counts. Make sure that the network
6
