ning the SETUP program.

Figure 2

Align ROM and socket notches

3.Follow the Remote Boot Workstation instal- lation procedure given in your network oper- ating system manual (i.e. create a Boot Image on the server for Novell networks, or start remote booting services on LAN Man- ager networks, etc.).

Section Three - Driver Installation

The network operating system (i.e. Novell, Win- dows NT, LAN Manager, etc.) that you are using requires a driver to access the network adapter card. The network adapters are NE-2000 com- patible and can use the NE-2000 driver supplied with your network operating system. Drivers for most popular network operating systems are in- cluded on the driver diskette in separate subdirectories. These drivers can be copied to your hard-drive by using the INSTALL.EXE program on the driver disk. Information on using each driver is available by running HELP.EXE from the root directory of the driver disk.

Section Four - Troubleshooting

This section describes some of the common prob- lems you may encounter while using your network adapter. When troubleshooting, you should make sure that the network you are connected to is

8

Page 9
Image 9
MaxTech NXP-16 manual Section Three Driver Installation, Section Four Troubleshooting, Align ROM and socket notches