PRODUCT DESCRIPTION

SECTION 2

ProductDescription

Maxtor hard disk drives are 17.5 mm high, 3.5-inch diameter random access storage devices which incorporate an on-board Ultra ATA/100 interface controller. High capacity is achieved by a balanced combination of high areal recording density and the latest data encoding and servo techniques.

Maxtor's latest advancements in electronic packaging and integration methods have lowered the drive's power consumption and increased its reliability. Exceptional data transfer speeds, 5400 RPM spin speed and 12 ms access times make these entry-class disk drives ideally-suited to desktop storage and consumer electronics applications.

Key Features

ANSI ATA-5/6 compliant PIO Mode 5 interface (Enhanced IDE)

Supports Ultra DMA Mode 5 for up to 100 MBytes/sec data transfers

2MB buffer with multi-adaptive cache manager

5400 RPM spin speed

12ms seek time

Zone density and I.D.-less recording

Outstanding shock resistance at 300 Gs

Custom load/unload ramp feature

High durability with 50K contact start/stop cycles

Advanced multi-burst on-the-fly Error Correction Code (ECC)

Extended data integrity with ECC protected data and fault tolerant servo synchronization fields

Supports EPA Energy Star Standards (Green PC Friendly) with ATA powering savings commands

Auto park and lock actuator mechanism

Low power consumption

S.M.A.R.T. Capability

Note: GB means 1 billion bytes. Total accessible capacity varies depending on operating environment.

2 – 1

Page 10
Image 10
Maxtor 2B010H1, 2B015H1, 2B020H1 manual ProductDescription, Key Features