Maytag ACO1560AC, ACO1840AC Avoid Electrical Shock, Electrical rating of this oven 120V AC 60Hz

Installation Instruction

Proper installation is the installer’s responsibility! Write the model & serial numbers on the owner’s manual. The model number label is located on the oven front.

Model Number Label

The mounting plate is located on the back side of the microwave oven.

Mounting plate

(Remove from back of oven)

The dimensions of the oven are as follows:

	ACO15* Models		ACO18* Models
•	Height : 16 7/16	in.	16 7/16 in.
•	Width : 29 15/16	in.	29 15/16 in.
•	Depth : 15 3/8 in.		15 1/2 in.
•	Weight : 52 lbs.		60 lbs.

!CAUTION

To avoid risk of personal injury two people are required to install this oven.

Avoid Electrical Shock!

•Before you drill into the wall, note where electrical outlets are and where electrical wires might be concealed behind the wall. YOU COULD GET AN ELECTRIC SHOCK if you contact electrical wires with your drill bit.

•Locate and disconnect the power to any electrical circuits that could be affected by installing this oven.

IF YOU DO NOT DISCONNECT THE POWER, YOU COULD GET AN ELECTRIC SHOCK.

Electrical rating of this oven: 120V AC 60Hz.

•13 A / 1500 W (Microwave oven, Cooktop Lamps, Ventilation Fan)

•You need a DEDICATED 120VAC / 60Hz / 20A, fused electrical supply (located in the cabinet above the microwave as close as possible to the microwave) serving only the microwave.

!WARNING

To avoid risk of electrical shock, personal injury or death; do not use the grounding plug improperly.

•Check with a qualified electrician if you are not sure whether the oven is properly grounded or if you do not completely understand the grounding instructions.

•Do not use a fuse in the neutral or grounding circuit.

•Save these instructions for the local electrical inspector’s use.

•This appliance MUST be grounded!

•If there is an electrical short circuit, grounding reduces the risk of electrical shock by providing an escape wire for the electric current. This appliance is equipped with a cord having a grounding wire with a grounding plug.

•Place the plug into a properly installed and grounded outlet.

•Do not use an extension cord.

•Keep the power cord dry and do not pinch or crush.

•Do not, under any circumstances, remove the power supply cord grounding prong.

Properly Polarized and

Grounded Outlet

Three-Pronged (Grounding) Plug

16021668 Rev. 0 A–2 ©2002 Maytag Appliances Company