Maytag AMV5164AA, AMV5164AC Care and Cleaning, Care And Cleaning, Cleaning The Grease Filter

Models: AMV5164AA AMV5164AC

1 80
Download 80 pages 33.45 Kb
Page 21
Image 21
 Care and Cleaning

CARE AND CLEANING Care and Cleaning

CARE AND CLEANING

For best performance and safety, keep the oven clean inside and out- side. Take special care to keep the inner door panel and the oven front frame free of food or grease build-up.

Never use rough powder or pads. Wipe the microwave oven inside and out, including the hood bottom cover, with a soft cloth and a warm (not hot) mild detergent solution. Then rinse and wipe dry. Use a chrome cleaner and polish on chrome, metal and aluminum surfaces. Wipe spatters immediately with a wet paper towel, especially after cooking chicken or bacon. Clean your oven weekly or more often, if needed.

2.Soak grease filter in hot water and a mild detergent. Rinse well and shake to dry. Do not use ammonia or place in a dishwasher. The aluminum will darken.

3.To reinstall the filter, slide it into the side slot, then push up and toward oven center to lock.

4.Open the door.

5.Push the hook and remove old filter.

6.Slide a new charcoal filter into place and close the door. The fil- ter should rest at the angle shown.

CLEANING THE

GREASE FILTER

The grease filter should be removed and cleaned often, at least once a month.

CLEANING THE CAUTION

To avoid risk of personal injury or property damage, do not operate oven hood without filters in place.

1.To remove grease filter, slide filter to the side. Pull filter downward and push to the other side. The filter will drop out.

CHARCOAL FILTER REPLACEMENT

If your oven is vented inside, the charcoal filter should be replaced every 6 to 12 months, and more often if necessary. The charcoal filter cannot be cleaned. To order a new charcoal filter, contact the Parts Department at your nearest Authorized Service Center or call

1-800-843-0304(inside U.S.A) or 1-866-587-2002(Canada). Order Charcoal Filter kit #: MVHRK4.

1.Unplug oven or turn off power at the main power supply.

2.Remove the two vent grille mounting screws. (2 middle screws)

3.Tip the grille forward, then lift it out.

7.Slide the bottom of the vent cover into place. Push the top until it snaps into place. Replace the mounting screws. Turn the power back on at the main power supply and set the clock.

21

Page 21
Image 21
Maytag AMV5164AA, AMV5164AC Care and Cleaning, Care And Cleaning, Cleaning The Grease Filter, Charcoal Filter Replacement