Maytag ARB2259CW, ARB2557CSL How to level your refrigerator, Installing your refrigerator, cont

Installing your refrigerator, cont.

How to level your refrigerator

If your refrigerator requires an ice maker water supply connection, proceed to How to Connect the Water Supply section (page 9) before leveling your refrigerator.

CAUTION

To protect personal property or refrig- erator from damage, observe the fol- lowing:

➢Protect soft vinyl or other flooring with cardboard, rugs, or other protective material.

➢Do not use power tools when performing leveling procedure.

MATERIALS NEEDED

➢3⁄8" hex head driver

➢Level

1.Move refrigerator to final location and plug in power cord.

2.Remove toe grille

and	bottom
cover(s).
3. Turn left and right adjust-
ment	screws (A) to	A
raise	or lower front

of refrigerator.

• Make sure refriger- ator cabinet is level from side to side by adjusting left and right roller adjustment screws.

•Turn stabilizing leg clockwise until firmly against floor.

•For Pullout Drawer Models: After completing the above listed steps, turn roller adjustment screws (A) 2 to 3 times counterclockwise, so that full weight of refrigerator rests on stabi- lizing legs.

4.Using a level, make sure front of refrigerator is 1⁄4" (6 mm) or 1⁄2 bubble higher than back of refrigerator.

•See leveling step 3 for assistance.

5.Replace toe grille and bracket cover(s). See markings on inside of toe grille to insure proper placement.

•Snap bottom portion into place first. Press down on top part of grille until top portion snaps into place.

10