Maytag ARB2257CW How to remove and install the pullout drawer, Installing your refrigerator, cont

Installing your refrigerator, cont.

How to remove and install the pullout drawer

DANGER

To prevent accidental child entrap- ment or suffocation risk, DO NOT remove the divider in the top freezer basket.

WARNING

To avoid electrical shock which can cause severe personal injury or death, disconnect power to refrigerator before removing doors. After replacing doors, connect power.

CAUTION

To avoid possible injury, product, or property damage, you will need two people to perform the following instructions.

To remove:

1.Pull upper basket out to full extension and lift out to remove.

2.Remove lower basket by pressing inward on basket sides, then lift basket.

3.Pull drawer open to full extension.

4.Remove Phillips screw from each side of rail system. (Some models)

5.Lift top of door to unhook door sup- ports from rail system. Lift door out to remove.

To install:

1. Pull both rails out to full extension.

2.While supporting door, hook door sup- ports into tabs located on inside of rail.

3. Lower door into final position.

4.With drawer pulled out to full exten- sion, insert lower basket by aligning tabs on both sides of lower basket with notches in rail assembly. Verify that the basket sides are hooked securely over the rails.

5.Slide upper basket into freezer. Make sure that rear of basket hooks behind rail catch.

Press Tab Here

8