Maytag ARB2257CSR Freezer features, Shelves, Drawers, Automatic ice maker, Ice Service Rack

Freezer features

Automatic ice maker

(SOME MODELS)

CAUTION

To avoid property damage, observe the following:

➢Do not force ice maker arm down or up.

➢Do not place or store anything in ice storage bin.

Using Ice Maker for the First Time

1.Confirm ice bin is in place and ice maker arm is down.

2.After freezer section reaches between 0° to 2° F (-18° to -17° C), ice maker fills with water and begins operating.

3.Allow approximately 24 hours after installation to receive first harvest of ice.

4.Discard ice created within first 12 hours of operation to verify system is flushed of impurities.

Operating Instructions

1.Confirm ice bin is in place and ice maker arm is down.

2.After freezer section reaches 0° to 2° F (-18° to -17° C), ice maker fills with water and begins operating. You will have a complete harvest of ice approximately every 3 hours.

3.Stop ice production by raising ice maker arm until click is heard.

4.Ice maker will remain in the off posi- tion until arm is pushed down.

Shelves

ICE SERVICE RACK

To install and remove rack:

➢To install, slide

L - s h a p e d	1
groove of shelf	2
down over back

wall screw. Push rack back until screw is stopped in L-shaped groove (1). Slide front portion of shelf over front wall screw (2).

➢To remove, perform above steps in reverse order.

FIXED FREEZER SHELF

To remove and install shelves:

➢Remove shelf

by pulling out to full exten- sion. Tilt up

front of shelf

and pull straight out.

➢To install, insert shelf into refrigerator liner rails and push to back of com- partment.

SLIDE-OUT FREEZER SHELF

To remove and install shelves:

➢ Remove shelf by pulling out to full extension. Tilt up front of shelf and pull straight out.

➢To install, insert shelf into refrigerator liner rails and push to back of com- partment.

Drawers

WIRE BASKET

To remove and install basket:

➢To remove

basket, pull basket out to full exten- sion. Tilt up front of basket and pull straight out.

➢To install, insert basket into refrigera- tor liner rails and push back into place.

PULLOUT DRAWER

BASKETS

(SOME MODELS)

(Door assembly of drawer removed from illustration for visual clarity.)

To remove and replace baskets:

➢See page 8 for basket removal and replacement instructions.

DANGER

To prevent accidental child entrap- ment or suffocation risk, DO NOT remove the divider in the top freezer basket.

16