
REVERSING DRYER DOOR SWING
3.Move hinge to other side. Reinstall 4 screws.
4.Reinstall plug strips on opposite side of the inner door.
5.Check for fingerprints on the glass. Clean if necessary.
Replace the Door Assembly
1.Place the inner door assembly inside the outer door assembly.
2.Reassemble the inner and outer door assemblies with the 6 screws.
Reverse the strike
1.Use a small
2.Remove the strike using a Phillips screwdriver.
3.Insert strike on the opposite side.
Reinstall the door
1.Partially insert the third screw from the top; then slide the hinge onto this screw while hooking the hinge into the front panel hole. Reattach door to dryer front panel with the remaining three screws.
2.Check for fingerprints on the glass. Clean if necessary.
3.Close door and check that it latches securely.
30