Maytag W10335465B Reversing Dryer Door Swing, Remove the Door Assembly, Reverse Hinge

REVERSING DRYER DOOR SWING

NOTE: Dryer only. Washer door is not reversible.

Remove the Door Assembly

1.Place a towel or soft cloth on top of dryer or work space to avoid scratching of the surface.

2.Remove 3 of the 4 screws that hold the door hinge on the front panel of the dryer. Partially loosen the remaining screw with keyhole opening and lift the door off the screw.

3.Lay the door assembly on a previously prepared flat surface with the inside (inner door assembly) facing up, and remove 6 phillips-head screws to release outer door assembly from inner door assembly.

NOTE: It is important that you remove only 6 indicated screws.

4.Lift the inner door assembly off outer door assembly.

5.Rotate outer door 180°.

Reverse Hinge

1.Use a small flat-blade screwdriver to remove 2 plug strips from the inner door. Slide the head of the screwdriver under the plugs, without scratching inner door surface, and lift up strip.

2.Remove the 4 screws that attach to inner door hinge.

29