ELECTRIC DRYER ELECTRICAL CONNECTIONS

Connecting 3-Wire Connection: Optional

Use for direct wire or power supply cord where local codes do not permit connecting cabinet-ground conductor to neutral wire.

Connecting Neutral Wire

1. Remove center terminal block screw. Also remove neutral

3. Connect remaining wires to outer terminal block.

ground wire by removing external ground conductor screw.

 

2.Connect neutral wire and neutral wire of power supply cord/ cable to center terminal block.

4.Connect a separate copper ground wire from the external ground conductor to an adequate ground.

LEVELING

Leveling Stacked Washer/Dryer

Leveling your washer/dryer properly reduces excess noise and vibration.

Not Level

LEVEL

Not Level

1.Remove cardboard from beneath washer/dryer. Place a level on top edges of washer/dryer, checking each side and front. If not level, tip washer/dryer and adjust feet up or down as shown in Steps 3 and 4, repeating as necessary.

27

Page 27
Image 27
Maytag W10335465B installation instructions Connecting 3-Wire Connection Optional, Leveling Stacked Washer/Dryer