7 11
7 11
Code
6 07
6 07
6 00

ELECTRONIC CONTROL SETUP INSTRUCTIONS

Start Operating Set-up

Washer/dryers are preset at the factory and do not require any programming. However, if you want to change the settings, follow the “Set-Up Codes” guide.

The code at the beginning of each segment is the factory default setting for the PD Models and is the same for the PR Models unless noted otherwise.

The set-up code is indicated by the one or two left-hand characters. The set-up code value is indicated by the two or three right-hand characters.

Set-Up Codes

Explanation

REGULAR CYCLE PRICE (WASHER)

Represents the number of quarters (coin 1) to start the washer; may adjust from 0–39. (See VALUE OF COIN 1.) Advance from 0–39 by pressing the lower- left (PERM. PRESS) button. Factory default of 7 quarters = $1.75.

PR MODELS ONLY: Factory default of 6 00, or 0 quarters.

Press the lower-middle (DELICATES AND KNITS) button once to advance to next code.

606REGULAR CYCLE PRICE (DRYER)

606Represents the number of quarters (coin 1) needed to start the dryer; may adjust from 0–39 (See VALUE OF COIN 1). Advance from 0–39 by pressing the upper-left (WHITES & COLORS) button. Factory default of 6 quarters = $1.50.

600PR MODELS: Factory default of 6 00, or 0 quarters.

Press the lower-middle (DELICATES AND KNITS) button once to advance to next code.

WASH LENGTH (WASHER)

This is the number of minutes for WASH. Washer comes from the factory preset with 11 minutes. Choose from 9–17 minutes by pressing the lower-left (PERM. PRESS) button.

Press the lower-middle (DELICATES AND KNITS) button once to advance to next code.

705REGULAR DRY TIME (DRYER)

705PD MODELS: Represents the number of minutes per quarter (coin 1).

Factory default of 5 minutes per coin. Example: 6 quarters x 5 minutes = 30 minutes.

By pressing the upper-left (WHITES &  COLORS) button, value adjusts from 1–99 minutes.

745PR MODELS: Represents the cycle length for free

cycles. As example: “7 45” = 45 minutes.

Press the lower-middle (DELICATES AND KNITS) button once to advance to next code.

Code Explanation

8 00 ADDITIONAL RINSE OPTION (WASHER) This option is either NOT SELECTED “00” or

SELECTED “ar.”

8 00 Not Selected “00.”

8 Ar Selected “ar.” Cannot be combined with the Super Cycle rinse option.

Press the lower-right (QUICK CYCLE) button once to change this selection.

Press the lower-middle (DELICATES AND KNITS) button once to advance to next code.

800TYPE OF DRYER PRICING (DRYER)

800Fixed Cycle with Top Off. For detailed description, see “General Washer/Dryer User Information.”

8FC PR MODELS ONLY: Factory default of FC. Fixed Cycle. For detailed description, see “General Washer/Dryer User Information.” Use the upper- right (DELICATES) button to change this selection.

Press the lower-middle (DELICATES AND KNITS) button once to advance to next code.

9 00 CYCLE COUNTER OPTION

This option is either NOT SELECTED “00” or

SELECTED “0C.”

9 00 Not Selected “00.”

9 0C Selected “0C” and not able to be deselected.

Press the lower-right (QUICK CYCLE) button

3 consecutive times to select “0C.” Once selected “0C” it cannot be deselected.

Press the lower-middle (DELICATES AND KNITS) button once to advance to next code.

If cycle counter (9 0C) is selected, the following is true:

1 00

Cycles in HUNDREDS

1 02

= 200

2 00

Cycles in ONES

2 25

= 25

 

 

 

 

TOTAL CYCLES = 225

This is “VIEW ONLY” and cannot be cleared.

Press the lower-middle (DELICATES AND KNITS) button once to advance to next code.

35

Page 35
Image 35
Maytag W10335465B installation instructions Start Operating Set-up, Set-Up Codes, Code Explanation