To Turn Off:
Simmer can be turned off in 3 different ways:
1.Use the power slider to set to a heat level.
OR
2.Touch the surface cooking area OFF keypad.
OR
3.Select a different cooking function.
Melt and Hold
The Melt and Hold function can be used with all surface cooking areas.
To Use
To Turn On:
1.Check that a surface cooking area has been selected.
2.Touch MELT AND HOLD. “A” will appear in the display, and the indicator light next to Melt will light.
The timer remains visible and can be set if desired.
To Turn Off:
Melt and Hold can be turned off in 3 different ways:
1.Use the power slider to set to a heat level.
OR
2.Touch the surface cooking area OFF keypad.
OR
3.Select a different cooking function.
Pan Detection
If the system cannot recognize the pan, or if the pan has been removed from the surface cooking area, the “replace pan” animation appears in the cooking area display as a reminder. See the following illustration.
If the pan is not placed within 30 seconds, the zone(s) will switch Off.
If a Timer is running when a pan is removed, the countdown will continue.
Performance Boost Function
This function allows you to increase the heat setting level above the maximum heat setting 9 for 10 minutes or less.
NOTES:
Performance Boost function is available on only 1 surface cooking area at a time within a zone. For example: Within Zone 1, Performance Boost may be used on surface cooking area A or B, but not on both. See the following illustration.
AB
Zone 1
Surface cooking areas A and B
Zone 2
Surface cooking areas C and D
CD
If you attempt to use Performance Boost on more than one surface cooking area in the same zone, “P” will briefly flash in the display, and the first surface cooking area selected for Performance Boost will automatically be set back to the highest available power setting. The last surface cooking area selected will be set to Performance Boost.
1.Check that a surface cooking area has been selected.
2.Touch BOOST. “P” will appear in the display.
3.Touch BOOST when finished. The “P” will no longer be visible in the display, and the Performance Boost function will no longer be active. The surface cooking area turns back to the highest available power level.
NOTE: The Performance Boost function may automatically deactivate to keep the internal electronic components of the cooktop from becoming too hot.
Timer
Use the cooking timer to set times up to 90 minutes. The timer is independent of any other control settings. A cooktop element must be active in order for the cooktop timer to be used.
To Use:
1.Touch the TIMER “up” or “down” pad. “01” appears in the timer display.
2.Touch the TIMER “up” pad to increase the time in
or
Touch the TIMER “down” pad to decrease the time in
3.The timer will start to count down after a few seconds.
To change the time, touch the TIMER “up” or “down” pad.
4.When the countdown is finished, “00” flashes and a tone will sound.
NOTE: When the power is restored after an outage, the timer will no longer be running.
7
