Defining your own presets

The 541 Surround Controller allows you to modify one of the built-in presets, and save it for future use.

●If you want to overwrite an existing preset press A or V to select the preset you want to overwrite.

You can either save the changes to the built-in preset, or you can create up to 10 presets of your own, with names of your choice, so you can use them alongside the built-in presets.

To save the preset settings

● Make sure the menus are unlocked; see To unlock the menus,

page 20.

For example:

Or you can choose the user-defined preset you started with; for example:

●Press Store on the remote.

Sto.User 1

Sto.Music

presets

● Press Preset (front panel), or • (remote), to select the preset

you want to modify.

● Change the preset parameters to the values you want to

store; see To change a preset parameter, page 23.

The settings have been stored in the new or existing preset you selected.

You can now edit the name of the preset.

own

● Press Store on the remote.

A flashing cursor shows the letter you

are editing:

Sto.•ser 2

Defining your

24

The display shows the next available

user-defined preset; for example:

Sto.User 2

●Press > or < to select the character position you want to edit.

●Press A or V to change the character.

Each press steps through the sequence A to Z, a to z, 0 to 9, full stop, and blank. You can also select a blank directly by pressing Clear on the remote.