Connecting video
Setting up the surround controller
To connect a TV
541 Surround Controller |
| Audio lead | Television |
| ||
|
|
|
|
| ||
TV | TV | A5 | TUNER | AUDIO | MONITOR | |
OUT | IN | OUT | IN | |||
| OUT | |||||
|
|
|
|
| ||
Video leads
●Connect the TV
If your television provides RGB inputs, and your LaserDisc had RGB outputs, you can achieve higher quality by connecting between them using the RGB connections from the surround controller’s TV SCART connector.
The TV SCART connector also provides a Function Select signal, used by most televisions to perform input switching.
To connect a VCR
541 Surround Controller |
| Video recorder | ||||
|
|
|
| Audio leads | ||
|
|
|
| AUDIO | ||
VCR | VCR1 | TAPE OUT | A6 | OUTPUTS | INPUTS | |
OUT | IN | |||||
|
| |||||
|
|
|
| |||
VIDEO
Video leads
●Connect the VCR audio outputs to the surround controller’s VCR1/A6 audio inputs using an audio phono lead.
●Connect one pair of the surround controller’s TAPE OUT sockets to the VCR audio inputs using an audio phono lead.
●Connect the VCR composite video output to the surround controller’s VCR1/V3
●Connect the surround controller’s VCR
32