To calibrate a loudspeaker |
| If you are calibrating by ear adjust each speaker until the sound | ||
● Press Source (front panel), or > or < (remote) to select the | is uniformly loud as you switch from speaker to speaker, | |||
ignoring any differences in timbre. Note that it is difficult to | ||||
loudspeaker you want to calibrate. |
|
| adjust the subwoofer correctly by ear, because low frequency | |
The display shows the loudspeaker |
|
| sounds appear much quieter, and we recommend using a | |
Left | +0.0 | Sound Pressure Level meter. | ||
| ||||
|
|
| ||
you are adjusting:
The
●Use A and V to adjust the level of the speaker.
If you are using a Sound Pressure Level meter adjust each speaker for the same reading at the listening position.
To end the calibration
●Press Off on the front panel or remote.
The 541 Surround Controller then returns automatically to Standby.
43