To configure a source

 

To change an option

●Turn off the control unit, using the power switch on the back panel.

●Turn on the power again while holding down the Display key on the front panel.

Config

The display will show:

●Press Source until the left-hand pair of characters identifies the source you want to configure.

For example, to configure the CD

CD Music

 

source the display initially shows:

 

The options are summarised in the table opposite:

Setting up sources

●Press Copy (front panel) or > and < (remote) to change. The left-hand side of the display shows the source you are configuring, and the right-hand side shows the current value of the option.

●Press A or V to step between the alternative values for the option.

When you have finished programming sources:

●Switch off at the back panel, and then switch on again to restore normal operation.

50