Controls and Features
Front Side/Top Surface/Left Side
1
2
3
4 | 5 |
Using the carrying handle
p |
9 |
8 |
7
4
6
1
2
Control Panel | 7 Air Inlets (3 locations: front, right, bottom of unit) | |
For details, please refer to ‘Control Panel’. (☞ Page 10) | The air inlets absorb air to cool the interior of the unit. Do | |
| not block or allow warm air to blow into them. | |
AC Power Input Terminal | This may lead to malfunction of the unit. | |
This is the AC power input terminal. Connect the sup- | ● The air inlet filter on the right side cannot be removed. | |
Please clean this filter regularly with, for example, a | ||
plied power cord to this terminal. (☞ Page 19) | ||
vacuum cleaner. | ||
|
3Carrying Handle
Use this handle when carrying this unit.
4Foot Lever (for front adjustable foot)
Use when extending or retracting the front adjustable foot. (☞ Page 14)
5Lens
This is a 1.3 x manual zoom lens.
Before projection, remove the lens cap. (☞ Pages 16, 19)
6Lens Cap
It is recommended that the cap be fitted on the lens when this unit is not in use to prevent the lens from becoming dirty. (☞ Page 19)
8Remote Sensor (Front)
When operating with the remote control, aim it towards this sensor. (☞ Page 17)
● A remote sensor is also located on the rear of the unit.
9Focus Ring
Turn manually to focus the projected image. (☞ Page 20)
pZoom Ring
Turn manually to zoom the projected image. (☞ Page 20)
7
